NSS-308L-17

Specification
AWS Specification: AWS A5.4 E308L-17
JIS Specification: N/A
Other Specification: N/A
Description
  • NSS-308L-17 is a lime-titania type electrode that shows 19% Cr - 9% Ni austenitic weld metal
  • Spatter free
  • Corrosion resistant
  • Good slag detachability
TYPICAL CHEMICAL COMPOSITION OF ALL WELD METAL DEPOSITS (%):

C

Si

Mn

Cu

Mo

Cr Ni

0.02

0.72

0.85

0.05

0.02

19.5 9.5

 

TYPICAL MECHANICAL PROPERTIES OF ALL WELD METAL DEPOSITS:
Yield Point
N/mm2 (KSI)
 
Tensile Strength
N/mm2 (KSI)
 
Elongation
%
 

440  (64)

590  (85)

41

 

SIZE AND RECOMMENDED CURRENT RANGE: AC, DC (+), DC (-)

DIAMETER (mm)

1.6

2.0

2.5

3.2

4.0

5.0

LENGTH (mm)

275

275

300

350

350

350

Current Amp

Flat

10 - 30

20 - 40

40 - 80

60 - 110

90 - 150

130 - 180

Vertical & Overhead

10 - 30

20 - 40

40 - 80

60 - 110

-

-

Welding Positions: ALL POSITIONS 
Approvals: N/A

NOTE:

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and test results for mechanical properties, deposit, or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design, and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.

  • Welding of 18/8 stainless steels including 301, 302, 303, 304, 304L, 304LN (nitrogen bearing), and titanium stabilized 321
  • Chemical and food processing industries, such as brewery, pharmaceutical equipment, nuclear engineering
  • Stainless steel general and architectural fabrication
  • Keep the arc length as short as possible
  • Select the recommended welding current range

ABOUT US

For over 37 years, NIHONWELD has been the market leader of high quality welding electrodes in both the domestic and international markets. With Nihonweld, you will WELD WITH COMPLETE CONFIDENCE.
Copyright © 2018 Industrial Welding Corporation
Web Design By WebToGo Philippines