NSS-310Mo

Specification
AWS Specification: AWS A5.4 E310Mo-16
JIS Specification: D310Mo-16
Other Specification: N/A
Description
  • NSS-310Mo is a lime-titania type stainless steel electrode that produces perfect austenitic structure
  • Resistant to sulphuric acid and has good high temperature properties due to Mo content in weld metal 
TYPICAL CHEMICAL COMPOSITION OF ALL WELD METAL DEPOSITS (%):

C

Si

Mn

Ni

Cr

Mo

0.09

0.44

2.25

20.68

25.92

2.26

 

TYPICAL MECHANICAL PROPERTIES OF ALL WELD METAL DEPOSITS:
Tensile Strength
N/mm2 (KSI)
 
Elongation
%
 

621  (90)

35

 

SIZE AND RECOMMENDED CURRENT RANGE: AC, DC (+)

DIAMETER (mm)

2.5

3.2

4.0

5.0

LENGTH (mm)

300

350

350

350

Current Amp

Flat

50 - 80

70 - 110

100 - 150

130 - 180

Vertical & Overhead

45 - 75

65 - 105

95 - 140

-


Welding Positions: ALL POSITIONS 
Approvals: N/A

NOTE:

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and test results for mechanical properties, deposit, or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design, and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.

  • Welding of 25% Cr - 20% Ni-Mo and clad steels of type 316, 316L, and 317 steels
  • Suitable for welding of the parts where pre-heat and post-heat treatment cannot be done, such as 5% Cr-Mo steel and 13% Cr steel
  • Keep the arc length as short as possible
  • Choose the appropriate welding current

ABOUT US

For over 37 years, NIHONWELD has been the market leader of high quality welding electrodes in both the domestic and international markets. With Nihonweld, you will WELD WITH COMPLETE CONFIDENCE.
Copyright © 2018 Industrial Welding Corporation
Web Design By WebToGo Philippines